4 in 1 Detection - A Ghost Hunters Equipment exclusive!
The QUAD allows you to monitor and compare four different environmental variables in one device! Your evidence of paranormal activity will be strong when you have more than one variable change at the same time. Not needing three more pieces of equipment to monitor all of these variables saves you money, weight, space and makes it easier to focus on one piece rather than four separate pieces of equipment.
How Does it Work?
The Para4ce Quad is an EMF detector for both AC and DC (static) EMFs! It has the same function as a REM-POD by alerting of changes in the surrounding energy field. It has a Vibration Sensor. It also has an alarm for temperature changes by intervals (ATDD function) which stands for Automatic Temperature Deviation Detection! To be able to do all of this, the Para4ce QUAD has each function working on an independent circuit so that each can detect without interference. A different tone is generated for each type of response.
EMF DETECTION has an internal antenna located on the front of the case. The top row of 9 LED lights indicates the level of the electromagnetic fields, including static discharge from possible spirit activity.
VIBRATION SENSOR is incredibly sensitive to any slight vibration or shock and is indicated by the 9 LED lights specified for vibrations. Any shocks or vibrations will also set off an audio alert.
ENERGY ABSORPTION works as a REM-POD and utilizes the antennae on top of the Quad to generate its own field with a 6 in (15 cm) radius. If the field is disturbed by a presence, it triggers the 4 larger LEDs and sounds an alert.
TEMPERATURE DETECTION takes a series of measurements that are averaged, stored and referenced by “TRef”. The temperature is then measured continuously. The two LEDs surrounding the display will flash indicating detections with either Red (increased) or Blue (decreased) temperature along with an auditory alert. The flash will stop blinking when the original referenced temperature has returned. The temperature can be measured in either Fahrenheit or Celsius. The temperature sensor is located under the Quad.
How to Use
Each feature has a power button, located on the back of the Quad. Individual functions may be used all at once or one at a time, depending on your preference. There is a general reset button that resets all the functions. The reset button and temperature switch are located on the bottom of the Quad’s stand.
EMF detects over 400 kHz
9 LEDs to indicate EMF
9 LEDs to indicate vibrations
4 LEDs to indicate energy absorption
2 LEDs to indicate temperature changes
Red reset button
Temp: -40 to 302 degrees Fahrenheit
4 AAA batteries (not included)
There are not supposed to be any screws for the battery lid. The battery compartment comes with a hole for a screw. However, screws are not needed at all.