Tracer 2 Light Wire
Visualize motion like never before with the Tracer 2 Light Wire. Watch the light strip follow movement- perfect for hallways, staircases, paths, or anywhere where spirits may tread. Temperature changes are also detected, giving you the full visual range of unseen movement.
How To Use:
Plug in the LED tracer wire to the body of the unit. Place the unit on the ground, where you are able to leave the wire in a straight line. Push the ON button located on the base unit. The LED wire will light up and run through all the lights to scan the area. After this scan is complete, it is ready to go.
Motion
The Tracer will have a single, small blue light running down the length of the wire, with a single constant blue light on the end. This is to help you see where it is in the dark. The LED wire will light up WHITE as it is triggered. After the disturbance leaves, the white lights will turn red for a few seconds, marking the area where the anomaly was.
Temperature
The base unit also detects ambient temperature. Any lights on the strip indicates the temp change near the base unit, not the LED strip.
- BLUE wave of light = 2 degrees COLDER
- PURPLE wave of light = 2 degrees HOTTER
Charging
Charging takes about an hour- red light means charging, blue is fully charged. The battery will last about eight hours.
Features and Specifications
- Precision infrared laser LiDAR distance sensor
- 75 detection zones using precision distance detection every ~1 inch
- Detachable 8.3' color LED light wire
- Distance: full length 8.5 feet
- Simple push on/off button
- Tripod mountable to adjust for unlevel ground or high carpet
- Rechargeable battery or plug it into power for unlimited use via USB-C cable
- Battery life: about 8 hours at full charge depending on number of hits
- Recharging: battery takes about 1 hour to recharge
- Made with lightweight PLA plastic and acrylic
- Size: Core device is 3.75"l x 3.3"w x 1.5"h and wire is 8.3' long
